model: Add support for Broadband Network Platform Software from GCOM Technologies Co.,Ltd. (#1097)

* Add support for Broadband Network Platform Software from GCOM Technologies Co.,Ltd.

* requested changes

1 files changed, 85 insertions, 0 deletions

diff --git a/lib/oxidized/model/gcombnps.rb b/lib/oxidized/model/gcombnps.rb
new file mode 100644
index 0000000..4a97162
--- /dev/null
+++ b/lib/oxidized/model/gcombnps.rb
@@ -0,0 +1,85 @@
+class GcomBNPS < Oxidized::Model
+  # For switches from GCOM Technologies Co.,Ltd. running the "Broadband Network Platform Software"
+  # Author: Frederik Kriewitz <frederik@kriewitz.eu>
+  #
+  # tested with:
+  #  - S5330 (aka Fiberstore S3800)
+
+  prompt /^\r?([\w.@()-]+?(\(1-16 chars\))?[#>:]\s?)$/ # also match SSH password promt (post_login commands are sent after the first prompt)
+  comment  '! '
+
+# alternative to handle the SSH login, but this breaks telnet
+#  expect /^Password\(1-16 chars\):/ do |data|
+#      send @node.auth[:password] + "\n"
+#      ''
+#  end
+
+  # handle pager (can't be disabled?)
+  expect /^\.\.\.\.press ENTER to next line, CTRL_C to quit, other key to next page\.\.\.\.$/ do |data, re|
+   send ' '
+   data.sub re, ''
+  end
+
+  cmd :all do |cfg|
+    cfg = cfg.gsub " \e[73D\e[K", '' # remove garbage remaining from the pager
+    cfg.each_line.to_a[1..-2].join
+  end
+
+  cmd :secret do |cfg|
+    cfg.gsub! /^(snmp-server community)\s+[^\s]+\s+(.*)/, '\\1 <community hidden> \\2'
+    cfg
+  end
+
+  cmd 'show running-config' do |cfg|
+    cfg
+  end
+
+  cmd 'show interface sfp' do |cfg|
+    out = []
+    cfg.each_line do |line|
+      next if line.match /^  Temperature/
+      next if line.match /^  Voltage\(V\)/
+      next if line.match /^  Bias Current\(mA\)/
+      next if line.match /^  RX Power\(dBM\)/
+      next if line.match /^  TX Power\(dBM\)/
+      out << line
+    end
+
+    comment out.join
+  end
+
+
+  cmd 'show version' do |cfg|
+    comment cfg
+  end
+
+  cmd 'show system' do |cfg|
+    out = []
+    cfg.each_line do |line|
+      next if line.match /^system run time        :/
+      next if line.match /^switch temperature     :/
+      out << line
+    end
+
+    comment out.join
+  end
+
+  cfg :telnet do
+    username /^Username\(1-32 chars\):/
+    password /^Password\(1-16 chars\):/
+  end
+
+  cfg :ssh do
+    # the switch blindy accepts the SSH connection without password validation and then spawns a telnet login prompt
+    # first thing we've to send is the password
+    post_login do
+      send @node.auth[:password] + "\n"
+    end
+  end
+
+  cfg :telnet, :ssh do
+    pre_logout 'exit'
+  end
+
+end
+