Updated mauvesend to allow an absolute time to be specified.

--HG--
rename : bin/mauveclient => bin/mauvesend

1 files changed, 0 insertions, 329 deletions

diff --git a/bin/mauveclient b/bin/mauveclient
deleted file mode 100755
index 77b8506..0000000
--- a/bin/mauveclient
+++ /dev/null
@@ -1,329 +0,0 @@
-#! /usr/bin/ruby1.8
-# NAME
-#   mauveclient - send alert(s) to a given alert station
-#
-# SYNOPSIS
-#   mauveclient [<destination>]
-#               [ --help | -h ] [ --manual | -m ] [ --version | -V ]
-#               [--source | -o <source>] [--replace | -p] [--verbose | -v]
-#               [--id <alertid> ... ]
-#
-# OPTIONS
-# <destination>   Where the alert should go. This can be either a hostname or
-#                 an IP address, and optionally a port, separated by a colon.
-#                 The default port is 32741.
-#
-#                 If no destination is supplied, the value from the file
-#                 /etc/mauvealert/mauveclient.destination is used. If no
-#                 destination can be determined, an error is raised.
-#
-#                 If a hostname is given and no port is specified, SRV records
-#                 are used to determine where the alerts should go to. The SRV
-#                 prefix is _mauvealert._udp. If no SRV records are found, A
-#                 records are used instead.
-#                
-#                 IPv6 addresses can be used, but must be enclosed in square
-#                 brackets, e.g. [2001:41c8::12].
-#
-# --source, -o <source>  identify the source of the alert (defaults to
-#                        hostname, but you might want to name your monitoring
-#                        systems more explicitly).
-#
-# --replace, -p          Send an update replacing all other alerts for this
-#                        source -- any previous alerts not specified in this
-#                        update are assumed to be cleared. If you specify this
-#                        option, you don't have to supply *any* alerts to raise
-#                        or clear (in which case all alerts from that source
-#                        will be cleared).
-#
-# --verbose, -v          If you specify this option once, it will print the
-#                        transmission ID of the packet for debugging. If you
-#                        specify it twice, it will print the entire data
-#                        structure.
-#
-# --help, -h             Display a short help message, and exit.
-#
-# --manual, -m           Display this manual, and exit.
-#
-# --version, -V          Display the version number for Mauve and exit.
-#
-# You can specify any number of alerts in an update - every time you specify
-# --id starts a new alert.
-#
-# --id, -i <alertid>       Unique specified for each alert raised. This should
-#                          be unique on a per-source basis, i.e. for an
-#                          individual application or host.
-#
-# --summary, -s <summary>  Text for humans describing the nature of the alert,
-#                          first 100 characters are only ones guaranteed to make
-#                          it to pagers, twitter, SMS etc.
-#
-# --detail, -d <detail>    HTML fragment describing the alert in more detail,
-#                          no limit on length.
-#
-# --subject, -u <subject>  Set the subject of the alert (i.e. the server/entity
-#                          that this alert concerns). If no subject is
-#                          specified, it is assumed to be the same as <source>,
-#                          detailed above.
-#
-# --raise, -r <time>       Mark the alert to be (re)raised at the given time.
-#                          If no time is supplied, "now" is assumed. See
-#                          SPECIFYING TIMES below for the format of <time>.
-#
-# --clear, -c <time>       Mark the alert to be cleared at the given time. If
-#                          no time is specified, "now" is assumed. See
-#                          SPECIFYING TIMES below for the format of <time>.
-#
-# SPECIFYING TIMES
-#
-# Times can be specified for an alert to be raised or cleared. This can be
-# specified as any time in the past or future. The format is + or -, followed
-# by a number, followed by a letter determining the units, one of s, m, h, d,
-# representing seconds, minutes, hours, and days, respectively. If no units are
-# specified, seconds is assumed. If no sign is specified, "+" is assumed.
-#
-# Some example times are:
-#
-# now   Immediately
-# 10    In 10 seconds time
-# +10m  In 10 minutes time
-# -10h  10 Hours ago
-#
-# SENISBLE USAGE
-#
-# Mauve uses UDP to transmit data, which means that there is no guarrantee a
-# single packet will reach the server. Therefore:
-#
-#  * The host/application should send "raise" notification regularly until the
-#    alert clears, whereupon it should regularly send "cleared" notifications.
-#
-#  * When setting a heartbeat-type alert, make sure that the raise time is more
-#    than double the period of the "clear" notifications. For example, if the
-#    host is sending a clear every 120 seconds, the raise time should be
-#    greater than 240 seconds, preferably greater than 360 seconds to allow for
-#    packets going missing, reducing the likelihood of false alerts.
-# 
-# Try to convey salient details about the alerts in the relevant fields. A
-# typical short alert from Mauve might read
-#
-#   RAISED: <subject>: <summary> -- <source>
-#
-# Make sure that the alert will be understood with just those three fields
-# displayed.
-#
-#  * Keep the summary brief and salient. 
-#  
-#  * Keep the summary constant, unless there has been a material change to the
-#    nature of the alert. Mauve may re-send any messages when the subject
-#    changes. If something is changing quickly, like load averages, best not
-#    to put them in the summary.
-#
-#  * Make sure that the subject is set correctly. Remember if no subject is
-#    set, then the source of the alert is used instead. 
-#
-#  * Make sure that the source is correct too -- nothing worse than an alert
-#    that comes in with an ambiguous origin. 
-#
-#  * The alert ID is used internally by Mauve to keep alerts consistent. This
-#    must be unique on a per-source basis. It is OK to have many alerts with the
-#    ID "heartbeat" as long as the source of the alert is different in each case.
-#
-# The raise and clear times can be specified, if needed, but generally leaving
-# them empty, i.e. setting them to "now" is sufficient. Mauve remembers when
-# an alert is first raised.
-#
-# EXAMPLES
-#
-# To raise an alert:
-#
-#   mauveclient -s smtp-out-1.example.com -i mailqueue \\ 
-#     -d "Mail queue has <b>54232</b> messages in it. That's <em>LOADS</em>" \\
-#     -u "Mail queue too big on outgoing SMTP server" -r
-# 
-# To clear an alert:
-#
-#   mauveclient -s smtp-out-1.example.com  -i mailqueue -c
-#
-# To create a "heartbeat" alert, i.e. one that says "Currently OK, but raise in the future if nothing more is heard":
-#
-#   mauveclient -i heartbeat -d "No heartbeat received for 1.2.3.4. Could be down!" -s "heartbeat failed"  -c -r +10m
-#
-# SEE ALSO
-#
-#  mauveconsole(1), mauveserver(1)
-#
-# AUTHOR
-#
-# Patrick J Cherry <patrick@bytemark.co.uk>
-#
-
-require 'getoptlong'
-
-%w(sender mauve_time version proto).each do |r|
-  begin
-    require "mauve/#{r}"
-  rescue LoadError => ex
-    puts ex.to_s
-  end
-end
-
-NOW = Mauve::MauveTime.now
-
-def error(msg)
-  STDERR.print "*** Error: #{msg}\n"
-  STDERR.print "*** For help, type: #{$0} -h\n"
-  exit 1
-end
-
-def parse_time_spec(spec = "now")
-  #
-  # Default to now
-  #
-  spec = "now" if spec.empty?
-
-  case spec
-    when "now"
-      NOW
-
-    when /^(\+|-)?(\d+)([smhd])?$/
-      if $1 == "-"
-        multiplier = -1
-      else
-        multiplier = 1
-      end
-
-      multiplier *= case $3
-        when "m" then 60
-        when "h" then 3600
-        when "d" then 86400
-        else
-          1
-      end
-
-      NOW + $2.to_i * multiplier
-
-    else
-      raise ArgumentError, "Unrecognised time format #{spec.inspect}"
-
-  end
-end
-
-begin
-  begin
-    update = Mauve::Proto::AlertUpdate.new
-    update.replace = false
-    update.alert = []
-  rescue NameError
-    # 
-    # Do nothing .. When generating manpages in the build process we don't need
-    # to have Protobuf available.
-    #
-    update = nil
-  end
-  message = nil
-  verbose = 0
-  help    = false
-  manual  = false
-  version = false
-
-  opts = GetoptLong.new(
-    ['-h', '--help',    GetoptLong::NO_ARGUMENT], 
-    ['-m', '--manual', GetoptLong::NO_ARGUMENT],
-    ['-V', '--version', GetoptLong::NO_ARGUMENT],
-    ['-o', '--source',  GetoptLong::OPTIONAL_ARGUMENT],
-    ['-p', '--replace', GetoptLong::NO_ARGUMENT],
-    ['-i', '--id',      GetoptLong::OPTIONAL_ARGUMENT],
-    ['-s', '--summary', GetoptLong::OPTIONAL_ARGUMENT],
-    ['-u', '--subject', GetoptLong::OPTIONAL_ARGUMENT],
-    ['-c', '--clear',   GetoptLong::OPTIONAL_ARGUMENT],
-    ['-r', '--raise',   GetoptLong::OPTIONAL_ARGUMENT],
-    ['-d', '--detail',  GetoptLong::OPTIONAL_ARGUMENT],
-    ['-v', '--verbose', GetoptLong::NO_ARGUMENT]
-  ).each do |opt,arg|
-
-    #
-    # Can catch empty arguments better if we set the GetoptLong things to
-    # "optional" rather than "required" and catch the empty arg here.
-    error "#{opt} cannot be empty" if arg.empty? and not %w(-h -m -V -p -v -c -r).include?(opt)
-
-    case opt
-      when '-h'
-        help = true
-      when '-m'
-        manual = true
-      when '-V'
-        version = true
-      when '-p'
-        error "Cannot send update -- not all libraries are available" if update.nil?
-        update.replace = true
-      when '-i'
-        error "Cannot send update -- not all libraries are available" if update.nil?
-        error "Cannot specify the same ID twice in one update -- ID #{arg}" if update.alert.any?{|a| a.id == arg}
-        message = Mauve::Proto::Alert.new
-        message.id = arg
-        update.alert << message
-      when '-o'
-        error "Cannot send update -- not all libraries are available" if update.nil?
-        error "Can only specify one source" if update.source
-        update.source = arg
-      when '-v'
-        verbose += 1
-      else
-        error "Cannot send update -- not all libraries are available" if update.nil?
-        error "Must specify --id before message" unless message
-        case opt
-          when '-s' then message.summary = arg
-          when '-u' then message.subject = arg
-          when '-d' then message.detail = arg
-          when '-c' then message.clear_time = parse_time_spec(arg).to_i
-          when '-r' then message.raise_time = parse_time_spec(arg).to_i
-          else
-            error "Unknown option #{opt}"
-        end
-    end
-  end
-
-  # CAUTION! Kwality kode.
-  #
-  if manual or help
-    # Open the file, stripping the shebang line
-    lines = File.open(__FILE__){|fh| fh.readlines}[1..-1]
-
-    found_synopsis = false
-
-    lines.each do |line|
-
-      line.chomp!
-      break if line.empty?
-
-      if help and !found_synopsis
-        found_synopsis = (line =~ /^#\s+SYNOPSIS\s*$/) 
-        next
-      end
-
-      puts line[2..-1].to_s
-
-      break if help and found_synopsis and line =~ /^#\s*$/
-
-    end
-  end
-
-  puts "#{$0}: version "+Mauve::VERSION if version
-
-  exit 0 if help or version or manual
-
-  error "Cannot send update -- not all libraries are available" if update.nil?
-  error "No alerts specified" unless !update.alert.empty? || update.replace
-
-  update.transmission_id = rand(2**63)
-
-  Mauve::Sender.new(ARGV).send(update, verbose)
-
-rescue ArgumentError => ae
-  error ae.message
-
-rescue StandardError => ae
-  error ae.message
-
-end
-