oxidized.git - configuration backup software

Age	Commit message (Collapse)	Author
2017-04-12	Added Mellanox voltaire switch to the list of supported devices	Clement Parisot
	Signed-off-by: Clement Parisot <clement.parisot@uni.lu>
2017-03-28	more "show version" additions	Robert Drake

2017-03-28	whitespace cleanup / fixing invalid command	Robert Drake

2017-03-28	added support for VTP	Robert Drake

2017-03-28	Remove single line 'Up Time' lines from show system	nesteffe

2017-03-23	Adding support for more "show version" commands	Robert Drake
	This is a port of some of the rancid "show version" parsing. I tried to simplify it from the way rancid does it, so it doesn't attempt to guess the device type, but it does provide IOS version and the type of processor.
2017-03-22	Fix alvarion block issue	Schylar Utley

2017-03-16	Do not comment out result for show configuration.	Everton Marques

2017-03-16	Support for Cisco NGA.	Everton Marques

2017-03-07	Merge pull request #757 from crami/master	ytti
	added model for OneAccess OneOS Voice Gateways/Routers
2017-03-07	added model for OneAccess OneOS Voice Gateways/Routers	Matthias Cramer
	Slight modifications to gemspec for newer ssh gem and correct telnet syntax
2017-03-07	Added lines to ignore for SAOS7 devics.	Max Mudde

2017-03-06	Update saos.rb	makzdot
	This proposed change is to make shure lines starting with "! Created: " are ignored. This preventes a diff in the config every time oxidized runs over Ciena SAOS devices. This is probably not the most elegant way but it's a start.
2017-03-06	Update regexp to match pfSense 2.3.3 config files	sorano
	Fix regexp for pfSense (2.3.3-RELEASE) to remove revision time in config pull. Also remove snort last_rule_upd_time in config pull.
2017-03-05	Merge pull request #752 from electriceel1985/mellanox_work	ytti
	make mellanox config versioning much less noisy
2017-03-03	make mallanox config versioning much less noisy	cpk

2017-03-01	traffic.conf and ports.conf are important configuration files that should be ↵	cpk
	backed up
2017-02-27	Fixed issues with HP Aruba 2530 fw 16.02.0016	Mk-

2017-02-22	Update to rogue AP filtering	Ross W

2017-02-22	Updates to ASA secret filtering	Ross W

2017-02-21	Fix for foundry/jetcore username prompt on telnet	f0rkz

2017-02-20	Added license information and gsub to take out chatty subscriber license ↵	Tim Pozar
	updates.
2017-02-20	Merge pull request #687 from nertwork/master	ytti
	Node - Cumulus additional params
2017-02-19	Update cumulus.rb	James Farr

2017-02-17	add software version	byq
	added software version
2017-02-16	Merge pull request #728 from mediumo/tplink	ytti
	Tplink model
2017-02-16	changed README and enable behaviour to cmd instead of send	root

2017-02-16	added variable fortios_autoupdate, to control inclusion of autoupdate messages	root

2017-02-16	added tplink model	root

2017-02-16	added psk and private-key removal to secret section	root

2017-02-14	Updated timos.rb to ignore "Generated" and "Finished" lines so it doesn't ↵	Tim Pozar
	look like a new config each time to crawls the box.
2017-02-14	Update opengear.rb	boudreau
	With new update : OpenGear/CM71xx Version 3.16.6u1 e02e2d59 -- Mon Nov 14 17:44:05 EST 2016 the backup wasn't working anymore, needed a prompt
2017-02-10	nxos.rb: Add secret block	Dave
	Took config from our local setup. Adding since it does not have it
2017-02-10	Merge pull request #712 from Ultra2D/issue-681	ytti
	Procurve convert next line (NEL) to new line
2017-02-10	Procurve convert next line (NEL) to new line	Ultra2D

2017-02-10	Remove (some) secrets from Comware config	Ultra2D

2017-02-07	Merge branch 'master' into ArubaIAP_MAS	Tim Pray

2017-02-07	Better notes and fix a mistake in the secret lines	Tim Pray

2017-02-07	Modify to support IAP, Instant Controller and Mobility Access Switches	Tim Pray

2017-02-06	changed "diagnose autoupdate version" behaviour, since with every update of ↵	root
	signatures the config version is changed
2017-02-06	nicer regex for both password variants of fortiOS	root

2017-02-06	added secret removal for fortiOS	root

2017-02-04	Cleaner way to fix older IronWare devices	Jason Wendel
	This works on older IronWare devices without needing a sleep between each command.
2017-02-03	Restore compatibility with older versions of IronWare	Jason Wendel
	Remove \r from the "enable" command. Both \r and \n are interpreted the same on older versions, causing a blank line to be sent as the enable password. Add a delay between the sending of the "logout" command and each "exit" command. Older devices don't seem to be able to keep up with the speed the commands are sent without a delay.
2017-02-03	Update fabricos.rb	K. Gasso
	Ignore Uptime/Power/Date fields in chassisShow and configShow
2017-01-31	Filter out rogue client alerts from AireOS	Ross W

2017-01-24	Don't show error is unsupported	vppencilsharpener
	This is the proposed fix for issue #669. Let me know if there is anything that I need to fix. This appears to be working correctly for the switch I have in house (S2400-24P). However the model is not working for the Aruba Instant AP (IAP) (virtual) controller. I hope to submit a fix for those once I have it working. The problems with that device appear to be unrelated to these changes as the prompt is incorrect.
2017-01-19	Tweak the white space for cleaning.	vppencilsharpener

2017-01-18	Update ironware.rb	devicenull
	Some Brocade devices only have two possible fan speeds. Previously, this only handled three levels of fan speeds. Updated regex will handle both of these cases: Fan 1 ok, speed (auto): 1<->[[2]] Fan 1 ok, speed (auto): 1<->[[2]]<->3
2017-01-11	Ignore fan speed changes for ironware	devicenull
	Brocade ICX/FCX log fan speed changes like this: Fan ok, speed (auto): 1<->[[2]]<->3 Fan ok, speed (auto): [[1]]<->2<->3 Remove the current fan speed from the configuration to prevent lots of useless changes from being logged.