oxidized.git - configuration backup software

Age	Commit message (Collapse)	Author
2017-02-07	Modify to support IAP, Instant Controller and Mobility Access Switches	Tim Pray

2017-02-06	changed "diagnose autoupdate version" behaviour, since with every update of ↵	root
	signatures the config version is changed
2017-02-06	nicer regex for both password variants of fortiOS	root

2017-02-06	added secret removal for fortiOS	root

2017-02-04	Cleaner way to fix older IronWare devices	Jason Wendel
	This works on older IronWare devices without needing a sleep between each command.
2017-02-03	Restore compatibility with older versions of IronWare	Jason Wendel
	Remove \r from the "enable" command. Both \r and \n are interpreted the same on older versions, causing a blank line to be sent as the enable password. Add a delay between the sending of the "logout" command and each "exit" command. Older devices don't seem to be able to keep up with the speed the commands are sent without a delay.
2017-02-03	Update fabricos.rb	K. Gasso
	Ignore Uptime/Power/Date fields in chassisShow and configShow
2017-02-03	Updated split to be more efficient, thanks ytti!	Richard Mayhew

2017-02-03	feature: support IP Addressed provided with a netmask	Richard Mayhew

2017-01-31	Filter out rogue client alerts from AireOS	Ross W

2017-01-24	Don't show error is unsupported	vppencilsharpener
	This is the proposed fix for issue #669. Let me know if there is anything that I need to fix. This appears to be working correctly for the switch I have in house (S2400-24P). However the model is not working for the Aruba Instant AP (IAP) (virtual) controller. I hope to submit a fix for those once I have it working. The problems with that device appear to be unrelated to these changes as the prompt is incorrect.
2017-01-25	Update	mbakerbp

2017-01-24	Requested changes	mbakerbp

2017-01-24	GPG support working	mbakerbp

2017-01-24	GPG support	mbakerbp

2017-01-24	Update	mbakerbp

2017-01-24	Syntax error	mbakerbp

2017-01-24	Untested GPG work	mbakerbp

2017-01-19	Tweak the white space for cleaning.	vppencilsharpener

2017-01-18	Update ironware.rb	devicenull
	Some Brocade devices only have two possible fan speeds. Previously, this only handled three levels of fan speeds. Updated regex will handle both of these cases: Fan 1 ok, speed (auto): 1<->[[2]] Fan 1 ok, speed (auto): 1<->[[2]]<->3
2017-01-11	Ignore fan speed changes for ironware	devicenull
	Brocade ICX/FCX log fan speed changes like this: Fan ok, speed (auto): 1<->[[2]]<->3 Fan ok, speed (auto): [[1]]<->2<->3 Remove the current fan speed from the configuration to prevent lots of useless changes from being logged.
2017-01-10	Ensure config gets returned even if no replacements are done	devicenull

2017-01-10	Mask out configuration date for fiberdriver	devicenull
	Our fiberdriver devices report a timestamp during 'show running-config', which results in a config diff on every run. This patch removes the '+! Configuration saved on 2017/01/10 14:21:20' line from the config, as well as a couple other useless status messages
2017-01-10	Add support for telnet	Jason Lixfeld

2017-01-09	Ignore undefined UTF8 in ironware.rb	devicenull
	We have some Brocade MLX devices that are triggering 'raised Encoding::UndefinedConversionError with msg ""\xFF" from ASCII-8BIT to UTF-8"'. Update the ironware.rb file to ignore undefined UTF8 as well as invalid UTF8
2017-01-09	adding zhone OLT/MX GPON/MetroE/DSL gear	Robert Drake

2016-12-27	Hide remaining passwords	Gaëtan DUCHAUSSOIS

2016-12-27	Update ios.rb	Gaëtan Duchaussois
	Do the terminal configure after enable since it might be prohibited in non ena
2016-12-20	changing ios gsub	nertwork

2016-12-20	Quagga fix	nertwork

2016-12-20	Quagga fix	nertwork

2016-12-20	adding in the Quagga.conf file for cumulus	nertwork

2016-12-14	delete secret password if it is called secret	mattttv

2016-12-12	bump up version0.19.0	Saku Ytti

2016-12-12	Recursively search from one dir above specified	Saku Ytti
	Fixes #626
2016-12-07	Fix suggested by ytti for issue #610	Mike Rostermund

2016-12-07	Remove trailing whitespace and enable prompt detection	Thane Gill
	Fixes: #630
2016-12-06	Update eos.rb	jbaker48

2016-12-06	exclude time from output	jbaker48

2016-12-04	New hook: awssns - Publish messages to AWS SNS topics	Nat Morris

2016-11-19	Updated config options	Neil Lathwood

2016-11-19	Added option to disable ssl verification checks for http source	Neil Lathwood

2016-11-18	Update ciscosmb.rb	Atroskelis
	Added old commands in case of different CLI variations.
2016-11-18	Update ciscosmb.rb	Atroskelis
	Forgot the username prompt change.
2016-11-18	Update ciscosmb.rb	Atroskelis
	Adapted for SG series, not sure about SF. Please test.
2016-11-11	expect prompt after entering enable password	Saku Ytti

2016-11-10	add support for PLANET SG switches	Florian Klink
	So far, only SGS switches were supported. Now, we check the model type during the 'show version' command, and only execute the 'show transceiver details' command in case an SGS switch was detected (as its not supported on SG models). We will also strip lines containing the current System Time and Uptime. These only appear on SG models, but it's a good idea to strip them anyways.
2016-11-09	renamed alvarion -> alvarion.rb	Robert Drake
	I believe from this: require File.join dir, file+'.rb' That the only way this model would work is if it has a .rb extension. I don't have any of these devices to test if this works.
2016-11-07	Merge pull request #606 from rfdrake/dlink	ytti
	This adds support for D-Link switches
2016-11-04	Merge pull request #608 from rfdrake/trango	ytti
	Added support for Trango/Trangolink-45